In part 2 of XenApp 7.5 install guide series we will configure Virtual Delivery Agent software on Windows 2012 R2 server.
The XenApp 7.5 quick installation guide series consist of the following articles:
Part 1 – Installation and site configuration
Part 2 – Install and configure VDA
Part 3 – Create and configure machine catalog
Part 4 – Create and configure delivery group
Configure Virtual Delivery Agent software
1. Mount XenDesktop iso and start installer. On the welcome screen only those options are available which are compatibile with operating system detected on used machine. As it is shown in Figure 1 virtual delivery agent software for server operating system will be installed.
4. Add XenApp controler address and press Test connection button. When controler address is successfully verified you will see green checkbox as it is shown in Figure 4 below. Press Add button to add controler address to the list. Press Next to continue.
5. Press Next to continue.
6. Press Next to continue.
7. Press Install to continue.
8. When server is restarted, we are ready to add this to the XenApp Machine Catalog.
9. Repeat steps 1-8 on all additional servers, which should be added to the Machine Catalog.
In the next article Part 3 – Create and configure machine catalog we will configure Machine Catalog. Stay tuned for update.
Leave A Comment